Graphics Card Errors

If you encounter a problem with the video card;

-You need to check the cable between the display card and the monitor.

- If the video card is onboard (integrated), check if the video is displayed with an external video card.

- If the problem is resolved, the motherboard can be replaced or an external graphics card can be installed.

- If the video card is an external video card, make sure that it is fully seated in the slot.

- Check if the problem is fixed by trying a new video card.

1) There are 3 short beeps on the desktop computer and there is no picture:

-Display card may have been removed. You need to be checked and put in place well.

- The graphics card may not be fully inserted in the slot slot. It must be checked and installed correctly.

- There may be a malfunction in the display card. If the fault cannot be rectified, a new video card must be purchased.

2) If the fan that cools the graphics card is not working:

-Check whether the thin power cable of the fan on the display card is connected.

-Remove the screen card and clean the fan. If there is dust, clean it with a vacuum cleaner.

- Remove the fan part carefully and lubricate the shaft part with contact spray, so that the speed of the fan will be easier to reach.

Note: If the fan on the graphics card does not rotate, your graphics card will overheat and may reset your system.

After a while, the video card may become unusable, so follow the instructions mentioned above.

3) If the computer turns itself off after a while:

This problem is one of the conditions caused by heat or short circuit.

- The processor fan on the processor should be checked.

-The fan cable may be output, in this case check the fan cable.

The fan may not be spinning or it may be having difficulty rotating. You need to replace the fan or clean it well.

The thermal paste between the processor fan and the processor may have dried. This paste must be renewed.
When these processes are done, the heat problem in the computer is solved.

Another reason for the shutdown is the video card overheating.

After the computer is turned off, the power plug should be pulled out and the display card should be touched. If there is a high temperature, the problem is with the graphics card.

-The power source should be checked. This problem is encountered when it is insufficient.