How To Fix Darktide Error Code 5002?

Darktide players encounter the error "Failed joining server. Error Code: 5002" in the game, and their access to the game is restricted. If you are facing suchaproblem, you can findasolution by following the suggestions below.

What is Darktide Error Code: 5002?

We may encounter various connection errorslike this, usually in cases where the server is busy, the servers are under maintenance or crashed. With the servers being full, some players say that they fixed this error by makingavpn connection. We will try to solve the problem by telling youafew suggestions.

How To Fix Darktide Error Code: 5002

We can solve the problem by following the suggestions below to fix this error.

1-) MakeaVPN Connection

Some users state that they did not encounter such an error again after makingavpn connection and that they accessed the game without any problems. We can check if the problem persists by performing the vpn connection.

If you do not have any vpn program, you can downloadafree vpn program and perform the connection process. If you are looking forafree vpn program, you can downloadafree vpn program by clicking thelink below.

Click to Download Urban VPN.

After downloading and installing the program, connect to American or European countries and check if the problem persists.

2-) Check Your Connection

The problem with the internet connection can cause many errors. If your internet connection is slowing down or disconnected, let's giveafew suggestions to fix it.

• If your internet speed is slowing down, turn your modem off and then on again. This process will relieve your internet alittle bit.
• We can eliminate the problem by clearing the Internet cache.

Clear DNS Cache

• Type cmd in the start search screen and run as administrator.
• Type the followinglines of code in order on the command prompt screen and press enter.
  • ipconfig /flushdns
  • netsh int ipv4 reset
  • netsh int ipv6 reset
  • netsh winhttp reset proxy
  • netsh winsock reset
  • ipconfig /registerdns
• After this operation, it will show that your dns cache and proxies have been cleared successfully.

After this process, you can open the program by restarting the computer. If the problem persists, let's move on to another suggestion.

3-) Register Another DNS Server

We can eliminate the problem by registering another dns server on the computer.

• Open the Control Panel and select the option Network and Internet
• Open the Network and Sharing Center on the screen that opens.
• Click on Change adapter settings on the left.
• Right-click on your Connection Type to open the Properties menu.
• Double-click Internet Protocol Version 4 (TCP /IPv4).
• Let's apply the settings by typing the Google DNS server we will give below.
  • Preferred DNS server: 8.8.8.8
  • Other DNS server: 8.8.4.4
• Then click on Verify settings on exit and press the OK button and apply the actions.

After this process, restart the computer and run the game Darktide.

4-) Turn Your Modem Off and On

Turn off your modem, wait 20 seconds and turn it back on. During this process, your ip address will change and will prevent various network problems. If the problem persists, let's move on to another suggestion.

5-) CreateaPrivate Port for Darktide

We can fix the problem by setting the port configured for Darktide.

• In the start search screen, type "Windows Defender Firewall" and open it.
• Click on "Advanced Settings" on the left side of the screen that opens.
• Click on the "Inbound Rules" option on the left side of the window that opens and click on the "New Rule" option on the right.
• Choose the "Port" option in the new window that opens and click the "Next" button.
• After this process, select the "TCP" option and type the port we will leave below in the box and click the "Next" button.
  • 27015, 27036
• Then select the "Allow Connection" option, press the "Next" button, set three options as selected and click the "Next" button .
• Then, give the name of the port where we performed the installation process and press the "Finish" button.

In this process, we have addedanew rule to the TCP port. In our next action, let's end our process by connecting the UDP port.

• Then add the new rule again and select "Port" and click the "Next" button.
• After this process, select the "UDP" option and type the port we will leave below in the box and click the "Next" button.
  • 27015, 27031-27036
• Then select the "Allow Connection" option, press the "Next" button, set three options as selected and click the "Next" button .
• Then, give the name of the port where we performed the installation process and press the "Finish" button.

After this, run Darktide to see if the issue persists.

Yes, friends, we have solved our problem under this title. If your problem persists, you can ask about the errors you encounter by entering our FORUM platform that we have opened.