Fix: OverWatch 2 Stuck at Loading Screen

OverWatch 2 players encounter the problem of "Stuck at Loading Screen" after running the game, restricting their access to the game. If you are facing suchaproblem, you can findasolution by following the suggestions below.

Why is OverWatch 2 Stuck on the Loading Screen?

This problem is usually accompanied by damage to game files. Of course, we may encounter such an error not only because of this problem, but also because of many problems. Possible reasons for the Overwatch 2 loading screen stuck issue can belisted as follows:

• Antivirus program may be blocking the game.
• The game file may be damaged.
• The system requirement may not be met.
• There may beanetwork problem.
• Your drivers may not be up to date.

The reasons we havelisted above can cause you to encounter many problems. For this, we will try to solve the problem by telling youafew suggestions.

How To Fix OverWatch 2 Stuck On Loading Screen?

To fix this error, you can find the solution to the problem by following the suggestions below.

1-) System Requirement May Not Be Met

If your computer does not meet the following system requirements, you arelikely to encounter such problems. For this, it is important that you follow the minimum and recommended system requirements.

Minimum System Requirement

• Operating system: Windows 10 64-bit
• Processor: Intel Core i3 or AMD Phenom X3 8650
• RAM: 6GB of RAM
• Storage: 50 GB of free space available
• Graphics card: NVIDIA GeForce GTX 600 Series, AMD Radeon HD 7000 Series
• Screen resolution: minimum 1024x768
• Internet: Broadband Internet connection

Recommended System Requirement

• Operating system: Windows 7 / Windows 8 / Windows 10 64-bit
• Processor: Intel Core i5 or AMD Phenom II X3 or higher
• RAM: 6GB of RAM
• Storage: 50 GB of free space available
• Graphics card: NVIDIA GeForce GTX 660 or AMD Radeon HD 7950 or higher
• Screen resolution: minimum 1024 x 768
• Internet: Broadband Internet connection

2-) Check Servers

Game developers' maintenance of the game may cause such problems. For this, we can understand what is causing the problem by checking the servers. Of course, not only due to the maintenance of the game, but also the crash of the servers may cause us to encounter this problem.

We can monitor the servers of the game Overwatch 2 using the DownDetector site to check.

Check Servers from DownDetector Status Page.

We can check the servers by accessing thelink we left above. You can see server or other maintenance by checking the Twitter page where Overwatch 2 game developers are currently sharing so that we can instantly check the maintenance of the servers.

Check Overwatch 2 Twitter Official Account.

3-) Run Battle.net as Administrator

The fact that the Battle.net program does not run as an administrator can cause many errors. If the permission to install the file on the storage is not allowed, running it as an administrator will help us solve this problem.

• Right-click on the Battle.net program on the desktop.
• Open it by clicking "Run as administrator" in thelistlisted.

4-) Verify Game File Integrity

We will verify the game file integrity and scan and download any missing or incorrect files. For this;

• Run the Battle.Net application.
• Click on the game OverWatch 2 at the top of the application.
• Click the gear icon next to the "Play" button on the screen that opens.
• After this process, click "Scan and Repair" to start the verification process.

After this process, the download will be performed by scanning the damaged game files. After the process is finished, try to open the game again.

5-) Check Your Connection

The problem with the internet connection can cause many errors. If your internet connection is slowing down or disconnected, let's giveafew suggestions to fix it.

• If your internet speed is slowing down, turn your modem off and then on again. This process will relieve your internet alittle bit.
• We can eliminate the problem by clearing the Internet cache.

Clear DNS Cache

• Type "cmd" in the start search screen and run it as administrator.
• Command prompt screen by typing the followinglines of code one after the other and press enter.
  • ipconfig /flushdns
  • netsh int ipv4 reset
  • netsh int ipv6 reset
  • netsh winhttp reset proxy
  • netsh winsock reset
  • ipconfig /release
  • ipconfig /renew
  • ipconfig /registerdns
  • netsh interface tcp reset
  • netsh int ip reset
  • netsh int tcp set global autotuninglevel=normal
• After this operation, it will show that your dns cache and proxies have been cleared successfully.

After this process, you can open the game by restarting the computer. If the problem persists, let's move on to another suggestion.

6-) Turn Your Modem Off and On

Turn off your modem, wait 20 seconds and turn it back on. During this process, your ip address will change and will prevent various network problems. If the problem persists, let's move on to another suggestion.

7-) Create Custom Port for OverWatch 2

If none of the above suggestions work for you, we can fix the problem by performing the configured port setting for OverWatch 2.

• Type "Windows Defender Firewall" in the start search screen and open it.
• Click "Advanced Settings" on the left side of the screen that opens.
• In the window that opens, click "Inbound Rules" on the left and "New Rule" on the right.
• In the new window that opens, select "Port" and click the "Next" button.
• After this process, select the "TCP" option and type the port we will leave below in the box and click the "Next" button.
  • 1119, 3724, 6113
• Then, by selecting "Allow Connection" and pressing the "Next" button, here are the three that appear before us. set an option to selected and click the "Next" button.
• Then give the name of the port from which we performed the installation and press the "Finish" button.

In this process, we addedanew rule to the TCP port. In our next action, let's end our process by connecting the UDP port.

• Then add the new rule again and select "Port" and click the "Next" button.
• After this process, select the "UDP" option and type the port we will leave below in the box and click the "Next" button.
  • 3478-3479, 5060, 5062, 6250, 12000-64000
• Then, by selecting "Allow Connection" and pressing the "Next" button, here are the three that appear before us. set an option to selected and click the "Next" button.
• Then give the name of the port from which we performed the installation and press the "Finish" button.

After this process, run OverWatch 2 and check if the problem persists.

Yes, friends, we have solved our problem under this title. If your problem persists, you can ask about the errors you encounter by entering our FORUM platform that we have opened.